Next Login
Audio Installation
DIGILINE MX MKII
82MEG428
Digital pocessor/matrix 8 x 8.
Digiline MX MKII is an 8 x 8 audio signal matrix. It is an interesting alternative for users who already have an amplifier or for those who need more power at the outputs. It can be controlled remotely via ASCII commands over RS232 or TCP/IP. It is possible to program actions such as preset changes, output mute, general master, etc. It also has 12 GPIO inputs/outputs (Digiline 8 has 4 GPIO) to extend the configuration possibilities. Digiline MX MKII has an RS232 port that allows receiving ASCII commands from any external device using this protocol. It is possible to program automatic actions such as preset changes, mute for all but one channel, etc.
Features
- 8 x 8 digital matrix.
- Mic/line inputs with phantom power +15 V.
- Ethernet or RS232 control.
- WorkCad software compatible.
| Input Channels | 8 entradas doble MIC (con phantom) + LINE balanceadas y una entrada MIC adicional. Todas conconector Euroblock/ 8 balanced dual MIC (with phantom) + LINE inputs and one additional MIC input. All with Euroblock connector |
| Output channels | 8 salidas con conector Euroblock/ 8 outputs with Euroblock connector |
| Control interface | TCP/IP, RS232 and GPI |
| Control connections | RJ45 (Ethernet TCP/IP) , DB9 (RS232) and Euroblock (GPI) |
| Control software | WorkCAD designer |
| Indicators | Front LED for signal presence, input and output clip |
| GPIs | 4 GPI (entradas TTL normalmente abiertas) para control directo y controladas por software/ 4 GPI (normally open TTL inputs) for direct and software-controlled control |
| Input Sensitivity | 0 dBu (20 dB PAD) |
| Phantom Power | 15 V entrada MIC (seleccionable)/ 15 V MIC input (selectable) |
| THD+N | < 0.1 % |
| Mixer | 8 mezcladores de 8 canales con inversión de señal y mute en cada canal/ 8 x 8-channel mixers with signal inversion and mute on each channel |
| Crossover | Butterworth Linkwitz-Riley and Bessel type filters up to 4th order with up to 7 filters per output |
| Equalization | EQ with peak, low pass, high pass, notch, low shelving, high shelving and band pass curves with up to 7 filters |
| Dynamics control | Common Limiter/Compressor for the first 7 outputs and 1 independent for the eighth output |
| Output volume control | Software selectable and front potentiometer (range 36 dB to -109 dB). 48 bit processing with 76 bits of |
| Presets | 10 memorias de programa disponibles/ 10 program memories available |
| DSP | 32 bit de procesado con 40 bits de precisión/ 32 bit processing with 40 bit precision |
| Oversampling | 8 x Oversampling con noise shaping de 5º orden @ 32-48 kHz; 4 x Oversampling @ 88.2 y 96 kHz; 2 x Oversampling @ 176.2 kHz y 192 kHz/ 8 x Oversampling with 5th order noise shaping @ 32-48 kHz; 4 x Oversampling @ 88.2 and 96 kHz; 2 x Oversampling @ 32-48 kHz; 4 x Oversampling @ 88.2 and 96 kHz; 4 x Oversampling @ 88.2 and 96 kHz; 2 x Oversampling @ 32-48 kHz |
| De-Emphasis | For 32, 44.1 and 48 kHz |
| Power supply | AC 90-264 V (auto) |
| Dimensions | 483 x 44 x 229 mm |
| Weight | 2.9 Kg |
| Length(m) | Width(m) | Height(m) | Weight(kg) | |
|---|---|---|---|---|
| Product | 0.23 | 0.48 | 0.04 | 2.90 |
| Box | 0.50 | 0.20 | 0.20 | 3.00 |
Digital matrix mixer of 8 x 8 (each input is composed of 2 inputs: 1 Mic and 1 Line).
Independent processing of signal for each output.
Controllable through TCP/IP protocol, in order to control from a unique computer all the units connected to an Ethernet network.
Third party controllers can be connected to control Digiline by TCP/IP and RS232 thanks to the command reader incorporated by its firmware.
All MIC inputs are phantom powered.
Powerful software WorkCAD Designer for Digiline connexion through TCP/IP.
GPIO triggering mode to launch actions, presets, etc from a simple controller.
DSP features
Matrix mixer: 8 mixers of 8 channels with reverse signal and mute for any channel.
Crossover: Butterworth type filters, Linkwitz-Riley and Bessel up to 4° order with up to 7 filters per output.
Equalizer: Equalizations with peak type curves, low pass, high pass, notch, low shelving, high shelving and band pass with up to 7 filter per output maximum.
Dynamic control: Common Limiter compressor for first 7 channels and an independent one for the last one.
Output channel volume control: Selectable by software and frontal potentiometer (36 dB to -109 dB range). 48 bit processing architecture with 76 bits of precision for most audio processing features.
Input & output delay with level controlled via software
Presets memory: 10 program memories available.
DSP Architecture: 32 bit processing with 40 bits of precision.
Oversampling: 8 x Oversampling with fifth order noise shaping @ 32-48 kHz; 4 x Oversampling @ 88.2 and 96 kHz; 2 x Oversampling @ 176.2 kHz and 192 kHz.
Digital De-emphasis: For 32,44.1 and 48 kHz.
Manual | Digiline MX MKII_ES_1-2 | Download | |
Manual | Digiline MX MKII_EN_1-2 | Download | |
Manual | WorkCAD3_Configurator_Manual_ES_1_3 | Download | |
Manual | WorkCAD3_Configurator_Manual_EN_1_3 | Download | |
Manual | Digiline control commands_EN_1-2 | Download | |
Software | WorkCAD3_Setup_3_5_13 |  | Download |
Others | WORKCAD3 - CHANGE LOG VERSION 3.5.12 | | Download |
Manual | Server_Plugin_EN_V1_0 | Download | |
Manual | Server_Plugin_ES_V1_0 | Download |
So far, there are no questions related to this product.
Register to be able to ask a question about this product.
Videos
