AP 1702 is a professional amplifier for low impedance installations. Thus, it can be operated with 4-ohm and 8-ohm loudspeaker systems as well as in bridge mode. It has a stereo/bridge mode selector switch and a floating ground switch to prevent noise caused by grounding other devices. Each channel has balanced/inputs and LINK via XLR3 connectors. For the output there are also Speakon connectors in this case. They are equipped with short-circuit and DC output protection, overtemperature and limiter protection as well as a soft start function. The 2 HU 19" size allows several units to be placed in a transport rack.
No. Channels | 2 |
W/Ch @ 8 Ohm | 500 W + 500 W |
W/Ch @ 4 Ohm | 850 W + 850 W |
W Bridge @ 8 Ohm | 1700 W |
Frequency Range | 20 Hz - 20 kHz ± 1.5 dB |
THD+N | 0.1 % |
Slew Rate | >30 V/uS |
S/N Rate | 95 dBA |
Damping Factor | >200 (5 Hz - 1 kHz) |
Input Sensitivity | 0,775 V / 1 V / 2 V |
Connections | XNL4 (Output) XLR3p male/female (input/LINK) |
Protections | Soft start, DC, VHF, Short circuit, Limiter, overheat |
Dimensions | 483 x 350 x 88 mm / 483 x 350 x 88 mm |
Weight | 11 kg |
Manual | AP_XXX2_Series_ manual 1.0 | ![]() | Download |