Next Login
Audio Installation
BLR2 A PLUS MKII
82BLD130
Blueline AoIP receiver.
The BLR2 A PLUS MKII is a one-channel stereo audio over IP receiver with built-in low impedance amplifier. The BLR2 A PLUS MKII device is able to extract one of the channels broadcast by the streamers of the Blueline system. In addition, the BLR2 A PLUS MKII includes 2x GPIs (pull-up) and 2x GPO (open collector).
The device can be powered either by PoE or by an external power supply.
Features
- 1 stereo channel.
- Euroblock connectors.
- Built-in amplifier.
- Configurable through Worcad 3 software.
| No. Channels | 1 stereo channel (unbalanced) or 1 single/mono channel (balanced) |
| Connections | Audio Out: Euroblock, 3 pin 5.08mm; Amp: Euroblock, 3 pin 5.08mm; Network: RJ-45 |
| Output sensitivity | -1.15 dBu (640mVrms) |
| Audio over IP | BlueLine UDP Datagrams |
| Ethernet | 100 Base TX |
| Consumption | 1.5 W |
| Control protocols | OSC |
| Audio extraction modes | Stereo/Single/Mono |
| Power supply | PoE Class: Class 0 802.3af; External power supply: 12/24 Vdc (Not included) |
| Dimensions | 109 x 133.75 x 40.45 mm |
| Weight | 360 g |
| Power (24v) | Stereo: 2 x 15W @ 4 Ohm; Bridge: 1 x 30W @ 8 Ohm |
| Power (PoE) | Stereo: 2 x 5W @ 4 Ohm; Bridge: 1 x 10W @ 8 Ohm |
| Length(m) | Width(m) | Height(m) | Weight(kg) | |
|---|---|---|---|---|
| Product | 0.13 | 0.11 | 0.04 | 0.36 |
| Box | 11.00 | 41.00 | 13.00 | 0.46 |
|
Analog audio Line
output |
|
|
Number of
channels |
1 stereo channel
(unbalanced) or 1 single/mono channel (balanced) |
|
Audio
connector |
Euroblock, 3
pin 5.08mm |
|
Output
sensitivity |
-1.15 dBu (640mVrms) |
|
Amplified
audio output |
|
|
Power output,
dual mode (24Vdc) |
2x 15W @ 4 ohm |
|
Power output, bridge
mode (24Vdc) |
1x 30W @ 8 ohm |
|
Power output, dual
mode (PoE) |
2x 5W @ 4 ohm |
|
Power output, bridge
mode (PoE) |
1x 10W @ 8 ohm |
|
Audio
connector |
Euroblock, 3
pin 5.08mm |
|
GPIO |
|
|
Connector |
2x Euroblock,
3 pin 3.81 mm |
|
GPIs |
Pull-up
resistor, 5 Vdc max. |
|
GPOs |
Open collector,
12Vdc max, 1A max. |
|
Network |
|
|
Connector |
RJ-45 |
|
Audio over IP |
BlueLine UDP datagrams |
|
Ethernet |
100 Base TX |
|
Main supply |
|
|
External power
supply |
12/24 Vdc (Not
included) |
|
PoE Class |
Class 0 802.3af |
|
Consumption |
1.5 W |
|
General |
|
|
Control
protocol |
OSC |
|
Audio
extraction modes |
Stereo/Single/Mono |
|
Dimensions |
109mm×133.75mm×40.45
mm |
|
Weight |
360 g |
Manual | BLR2 A PLUS MKII - MANUAL USUARIO v1.2 | Download | |
Manual | BLR2 A PLUS MKII - USER MANUAL v1.2 | Download | |
Manual | WorkCAD3_Configurator_Manual_ES_1_3 | Download | |
Manual | WorkCAD3_Configurator_Manual_EN_1_3 | Download | |
Manual | BLUELINE NETWORK AND OSC - MANUAL USUARIO v1.2 | Download | |
Manual | BLUELINE NETWORK AND OSC USER MANUAL V 1_2 | Download | |
Manual | Server_Plugin_Manual_ES_V1_0 | Download | |
Manual | Server_Plugin_Manual_EN_V1_0 | Download | |
Manual | LEGACY_OSC_IN_WORKCAD_(RESOLUME_EX)_v_1_1 |  | Download |
Software | WorkCAD3 | | Download |
Others | WORKCAD3 - CHANGE LOG VERSION 3.5.12 | | Download |
So far, there are no questions related to this product.
Register to be able to ask a question about this product.
Videos
